User Guide for Virtual Serial Port ActiveX Control
User Guide for Virtual Serial Port ActiveX Control
The SetCTS method sets or clears CTS (clear-to-send) signal. BOOL SetCTS( BOOL On // Set or clear CTS signal ); Parameters: On [i...
Wed, 8 Dec, 2021 at 5:31 PM
The SetDCD method sets or clears DCD (carrier detect) signal on virtual serial port. BOOL SetDCD( BOOL On // Set or clear DCD signal ); ...
Wed, 8 Dec, 2021 at 5:35 PM
The SetDSR method sets or clears DSR (data-set-ready) signal. BOOL SetDSR( BOOL On // Set or clear DSR signal ); Parameters: On [in...
Wed, 8 Dec, 2021 at 5:36 PM
The SetRING method sets or clears RING signal on virtual serial port. BOOL SetRING( BOOL On // Set or clear RING signal ); Parameter...
Wed, 8 Dec, 2021 at 5:39 PM
SetTimeouts method sets timeouts for virtual serial port. Timeout values set by Application are overridden BOOL SetTimeouts( LONG ReadIntervalT...
Wed, 8 Dec, 2021 at 5:41 PM
The SetStrictBaudrate method enables or disables emulation of data transfer speed, according to the current virtual port Baudrate value. For Windows NT4, 20...
Wed, 8 Dec, 2021 at 5:43 PM
The SetWiring method sets connection type depending on parameters passed to this method BOOL SetWiring( LONG Dtr, // Transmit line signal ...
Wed, 8 Dec, 2021 at 5:47 PM
The SetLineControl method sets the line control register (LCR). The line control register controls the data size, the number of stop bits, and the parity. ...
Wed, 8 Dec, 2021 at 5:53 PM
The SetHandFlow method sets the configuration of handshake flow control. BOOL SetHandFlow( ULONG ControlHandShake, // Handshake control par...
Wed, 8 Dec, 2021 at 6:00 PM
The SetChars method sets the special characters, which are used for handshake flow control. BOOL SetChars( CHAR EofChar, CHAR Erro...
Wed, 8 Dec, 2021 at 6:26 PM