Parameters:
[host], [reverse_host], tcp_port, usbhub, usbport, [nick], [name], [auth], [encr], [compr], [sharedWith], [reserved1], [reserved2], [allowRDisconnect].
host - the IP address of the host to which the device is connected physically. This parameter is mandatory to connect to a remote device and is optional to share a local device.
reverse_host - the address of the host to which the TCP connection is established. Is used for callback connections when the host where the device is shared acts as a TCP client. If not empty, the server will permanently try to connect to the client on reverse_host_:tcp_port
tcp_port - the name of the TCP port to share the device on or to connect to a reverse host (if specified).
usbhub - the name of the USB hub to which the device is connected physically
usbport - the name of the USB port to which the device is connected physically (or kernel_devname if the device is local).
nick - device description
name - device name
auth - if not empty, password authentication is enabled
encr - if not empty, traffic encryption is enabled
compr - if not empty, traffic compression is enabled
sharedWith - the IP address of the client that is connected to the shared device
reserved1, reserved2 - password authentication parameters (To set password authentication, you should use the Device::setPassword function)
allowRDisconnect - if not empty, any remote client is allowed to disconnect other clients from the shared device
A string representation of a shared local device.
Examples:
1) ,,5001,usb1,1-1,description,Mass Storage,A,E,C,,,,R
5001 - the device is shared and available for connection on TCP port 5001,
usb1 - the name of the USB hub to which the device is connected physically,
1-1 - the name of the USB port to which the device is connected physically,
description - device description,
Mass Storage - device name,
A - authentication is enabled. (To set password authentication for connections to the shared device, use the function Device::setPassword),
C - traffic compression is enabled,
E - traffic encryption is enabled,
R - any remote client is allowed to disconnect other clients from the device.
2) ,,5001,usb1,1-1,,Mass Storage,,,,192.168.0.1,,
5001 - the device is shared and available for connection on TCP port 5001,
usb1 - the name of the USB hub to which the device is connected physically,
1-1 - the name of the USB port to which the device is connected physically,
Mass Storage - device name,
192.168.0.1 - IP address of the client that is currently connected to the device.
3) ,192.168.0.1,5001,usb1,1-1,description,Mass Storage,A,E,,,,,
192.168.0.1:5001 - the device is shared and is available for callback connection on TCP port 5001. ‘192.168.0.1’ - the address of the host to which a callback connection is established. usb1 - the name of the USB hub to which the device is connected physically,
1-1 - the name of the USB port to which the device is connected physically,
description - device description,
Mass Storage - device name,
A - authentication is enabled. (To set password authentication for connections to the shared device, use the function Device::setPassword)
E - traffic encryption is enabled.
A string representation of a remote USB device.
Examples:
1) 192.168.0.5,,17505,RootHub#1,Port1,description,Mass Storage,A,E,C,,,R
192.168.0.5:17505 - the address of the host on which the device is shared,
RootHub#1 - the name of the USB hub to which the device is connected physically,
Port1 - the name of the USB port to which the device is connected physically,
description - device description,
Mass Storage - device name,
A - authentication is enabled.
C - traffic compression is enabled,
E - traffic encryption is enabled,
R - any remote client is allowed to disconnect other clients from the device.
2) 192.168.0.5,,17505,RootHub#1,Port1,,Mass Storage,,,,192.168.0.1,,
192.168.0.5:17505 - the address of the host on which the device is shared,
RootHub#1 - the name of the USB hub to which the device is connected physically,
Port1 - the name of the USB port to which the device is connected physically,
Mass Storage - device name,
192.168.0.1 - IP address of the client that is currently connected to the device.
3) 192.168.0.5,192.168.0.1,17505,RootHub#1,Port1,,Mass Storage,A,E,,,
192.168.0.5 - the address of the host on which the device is shared,
192.168.0.1:17505 - the address of the host to which a callback connection is established,
RootHub#1 - the name of the USB hub to which the device is connected physically,
Port1 - the name of the USB port to which the device is connected physically,
Mass Storage - device name,
A - authentication is enabled.
E - traffic encryption is enabled.